Forklift Attachments Inglewood - Many different jobs would be impossible without the help of forklift attachments. There are numerous forklift attachments that make jobs faster and safer to complete. Forklift operators require training for each attachment they will be using as well as their general forklift training.
There are many non-hydraulic attachments and hydraulic attachments available for forklift attachments. They provide many benefits including decreasing fuel consumption, time, man-power, damage to stock and employee accidents.
Equipment Considerations
A forklift attachment can replace an existing forklift attachment or can be added to a forklift that does not already have one. Various considerations need to be taken prior to adding or replacing any forklift attachment. These considerations include the kind of forklift, the machine’s capacity, the number of hydraulic functions required to power the attachment’s and the type of carriage.
Failure to properly consider these factors will increase the safety risk associated with operation of a forklift and its attachments and increase the risk for damage to the forklift, the attachment and surrounding area, including stock. There are further safety issues to take into consideration which can be discussed in more detail below.
Forklift Rating and Re-Rating
Forklifts are given lift capacity ratings by the manufacturer which will need to be adjusted if adding or changing a forklift attachment. Manufacturers of forklift attachments usually offer calculators available online to estimate the safe lifting capacity when using a particular attachment. It is important to note that only the forklift manufacturer can provide accurate lifting capacities.
Prior to installing any attachment, it is important to contact the local authorized dealer of the forklift brand being used and request that they re-rate the forklift in accordance with the attachment being considered for use. There will be a new specification plate that is factory authorized once the forklift manufacturer has re-rated the machine. The newly upgraded specification plate will replace the original plate and needs to be installed showing the new forklift rating.
Equipment Upgrades
Forklift attachments rely on the machine’s hydraulic function and are made up of a forklift valve that has a lever situated close to the operator. This creates two passages of pressurized hydraulic oil for powering the attachment features. Hydraulic forklift attachments typically offer numerous features compared to the number of valves on the forklift. Not ever forklift attachment is hydraulic. In these instances, one or more valves need to be added. There are several methods of adding a valve. The manufacturers of forklifts create accessories to simplify hose and valve routing. Due to the cost of labor and parts required, this process may not be practical. Another possibility is to install a cable reel, solenoid valve and hose to divert oil from an alternate location. Unfortunately, hose and cable reels can sometimes block the operator's view and can be easily damaged. Special hoses and a solenoid valve kit an be used to create an electrical conduit out of the reinforced braid. Since these hoses replace existing forklift hoses, they remain safe from external damage while maintaining clear vision for the operator.
Safety Considerations
Prior to fitting any type of forklift attachment, proper training must be obtained. The operator needs to be able to remove, fit and operate the attachment.
There are 2 vital safety factors to think about before operating any type of forklift attachment.
First, any attachment on a forklift will reduce its nominal load rating, as mentioned above. The nominal load rating is computed with a stock fork carriage and forks. However, the actual load rating may be substantially lower.
Secondly, the forklift’s center of gravity will be affected when any forklift attachment is added. The forklift’s stability will be reduced and this needs to be computed for safety. Since the attachment’s weight is prominent in front of the fulcrum point on the forklift, the operator needs to drive the machine as though it is partially loaded even before it is carrying a load. Operators need to travel gently and slowly every time they use an attachment and take extra care while turning. As noted above, each attachment should be listed on the data plate of the forklift’s capacity.
To maintain safety, special checks need to be completed before using any forklift attachment. The forklift attachment needs to be the right one for the type of forklift being used, appropriate for the load at hand, correctly attached, locked in place and permitted on the data plate of the forklift.
List of Common Forklift Attachments
Below is a list of popular forklift attachments and their general uses. There are numerous forklift attachments and this list will cover the most popular. As you will see, the large variety of attachments available have the capacity to greatly increase the efficiency of many jobs.
SIDESHIFTER:
The operator can manipulate the forks laterally with a sideshifter. This allows for easier load placement without having to move the entire forklift.
FORK POSITIONERS:
Fork positioners allow the forks to travel apart or together with each other to adjust for different load sizes.
DIMENSIONING DEVICES:
Dimensioning devices feature cargo dimensions useful for creating better efficiency in trucks, trailers and warehouses. This technology is often used alongside billing systems that monitor volume.
ROTATOR:
A rotator helps to straighten tilted skids and handle custom load requirements and fast unloading. Numerous attachments have a rotator feature.
ROLL AND BARREL CLAMP:
Allows for grasping of load with a rounded shape, such as rolled material and barrels, often with various pressure setting to avoid damage to more fragile materials. These attachments sometimes also have a rotate function to assist with, for example, rotating an item from a horizontal to a vertical position.
CARTON AND MULTIPURPOSE CLAMP:
The carton and multipurpose clamp has pressure settings and is used for handling more squared shaped loads. It easily masters boxes, bales and cartons.
POLE ATTACHMENTS:
Pole attachments are placed where the forks would normally be and are used for transporting carpet and rolled up linoleum.
SLIP SHEETER OR PUSH-PULL:
The slip sheeter or push-pull allows the operator to move sheets by clamping onto slip sheets. This is an option instead of relying on pallets. The slip sheet can be moved onto thin and wide metal forks to simplify loading or unloading by pushing the slip sheet. The “Save” variation allows the slip sheet to be taken off for reuse later. The “Standard,” attachment variation is another option.
DRUM HANDLER:
The drum handler is built for holding drums. It may have arms that encompass the drum for transporting or it may feature a spring-loaded jaw to grip the drum’s top lip.
DRUM AND STORAGE BIN TIPPER:
The drum and storage bin tipper is designed for easier transport of liquid items or loose materials into bigger containers.
MAN BASKET:
The lift platform known as a man basket is designed to transport workers vertically. It is outfitted with brackets and railings to anchor safety harnesses.
TELESCOPIC FORKS:
Telescopic forks are used in warehouses that rely on stacking two pallets in the event one shelf is located behind another shelf with no aisle in between.
SCALES:
Scales are helpful for allowing operators to transport pallets while weighing them. This stops the need for interrupting work with regular travel to the scales. It can be used in legal-for-trade weights for operations that bill by how much items weigh.
SINGLE-DOUBLE FORKS:
The single-double forks can be used alongside regular lifting tasks. It allows a single pallet or platform to move or two pallets beside each other. Additional attachments can be used and this replaces the need for having a separate specialty unit; thus reducing maintenance and operating costs associated with more than one machine.
SNOW PLOW:
Originally designed for snow removal, snow plow attachments can be used to move other loose items.
SKIPS:
Allows safe and speedy removal of waste to the appropriate skip or waste compactor. Skips are available in a roll-forward type and a bottom-emptying type.
BOOMS AND JIBS:
Allow for extended reach of a forklift to transport suspended loads or loads that are stacked high or deep. They are available in different setups such as reach over and precision lifting or low profile fixed and extendable lengths.
Forklift Attachment PDF
